Cement residue and efflorescence: cleaning stone and paving
A white mark does not identify its cause. Separate mortar residue, salt deposits and damage to the finish before choosing a chemical. This IPANDA workflow starts with the material and evidence, then checks a permitted product and the dry result.
Questions to ask about the marks
| Observation | Check | Next step |
|---|---|---|
| After masonry or grouting | Mortar type and exact substrate | Check a cement cleaner’s permitted uses. |
| Powder after wetting and drying | Water source and recurrence | Consider efflorescence and investigate moisture. |
| Dull mark after cleaning | Whether the finish has changed | Stop and assess surface damage. |
| Unidentified white film | Previous chemicals and coatings | Seek identification before selecting acid. |
1. Record the material and history
Record the exact substrate, finish, age, grout or mortar, previous cleaners and impregnations. Photograph the dry surface, a close-up and the joint. On glazed or painted materials, the finish matters as much as the substrate. The table frames questions; it is not a diagnosis from a photograph.
2. Separate residue from damage
Mortar residue, moisture-related salt deposits and an etched finish require different responses. Acid etching may require restoration rather than more cleaner. Recurring deposits call for investigation of the moisture source.
Sources: Natural Stone Institute · Care & Cleaning of Natural Stone (EN) ↗
3. Check all materials
Marble, limestone and travertine are acid-sensitive. Granite is not universally compatible either: HF attacks silicate minerals. Assess joints, metal trims, glass and coatings separately. A trial cannot override a product prohibition.
Sources: Natural Stone Institute · Limestone & Travertine (EN) ↗Natural Stone Institute · Care & Cleaning of Natural Stone (EN) ↗
4. Compare the product’s actual purpose
CEMENT CLEANER addresses cement and mortar residue; SALT CLEANER addresses salt deposits. Both are acidic: purpose alone is not proof of compatibility.
EXTRA+ documentation conflicts: the technical sheet linked from IPANDA.kz prohibits concrete, while PROSEPT’s current page lists it. EXTRA+ is therefore excluded from automatic surface/task matching. Obtain current manufacturer confirmation for the batch before considering concrete or paving.
Sources: PROSEPT · CEMENT CLEANER 022-5 (RU) ↗PROSEPT · SALT CLEANER 021-5 (RU) ↗PROSEPT · EXTRA+ · технический лист / technical sheet (RU) ↗PROSEPT · EXTRA+ 101EX-5 · страница / product page (RU) ↗
5. Document a permitted trial
Once compatibility is confirmed, select an inconspicuous patch and retain an untreated reference. Protect adjacent materials and follow label/SDS protection requirements. Record the batch, dilution and units, area, solution used, contact time and dry outcome. Follow the product’s preparation and rinsing procedure; there is no universal regime. Do not mix cleaners or neutralise one with another on the surface. Stop if colour, gloss or texture changes.
6. Keep the calculation units consistent
Example only: 0.6 L used on 3 m² equals 0.2 L/m². The same complete procedure on 80 m² would need 16 L of working solution before reserve. This is not a product dosage. Calculate concentrate separately from its specified dilution; do not count passes twice. SALT CLEANER’s published area rate is a mass of working solution, not litres; converting requires density.
Sources: PROSEPT · SALT CLEANER 021-5 (RU) ↗
7. Assess before applying protection
Complete cleaning and rinsing, assess the dry result and investigate recurring moisture before selecting an impregnation. Follow its substrate requirements. Send IPANDA the material, photographs, previous treatments and trial record. An unidentified mark or changing finish needs assessment, not a stronger cleaner.
Common questions
Can a water repellent cover the white marks?
Identify the cause, complete a permitted clean and assess the dry surface first. Follow the impregnation’s substrate requirements.
Why can removing cement conflict with protecting concrete?
Removing the residue and preserving the substrate are separate requirements. Check both, including joints and finishes.
When should I assess the trial?
Compare the fully dry patch with an untreated area. A wet appearance is not the final result.
Sources and limits
Reviewed 19 October 2026. Sources support product purposes and restrictions. The trial record and arithmetic example are IPANDA’s workflow. EXTRA+ uncertainty is stated explicitly; use instructions for your batch.
Natural Stone Institute · Care & Cleaning of Natural Stone (EN) ↗Natural Stone Institute · Limestone & Travertine (EN) ↗PROSEPT · CEMENT CLEANER 022-5 (RU) ↗PROSEPT · SALT CLEANER 021-5 (RU) ↗PROSEPT · EXTRA+ · технический лист / technical sheet (RU) ↗PROSEPT · EXTRA+ 101EX-5 · страница / product page (RU) ↗Products discussed in this guide
CEMENT CLEANER →
Acidic concentrate for removing cement residue after construction. Dilution depends on the task; check the instructions and substrate compatibility.
SALT CLEANER →
1:2 concentrate for removing efflorescence from mineral surfaces. Test on a small area before use.
EXTRA+ →
Strong-acid post-construction cleaning concentrate for cement, lime, grout, salt deposits, scale and rust runs. 5 L.
Check material compatibility, dilution and application method against the specific product instructions. Test on a small area before treating the entire surface.
How we prepare our guidance ↗About IPANDA ↗