How to remove grease from kitchen extractor hoods: PR Smoke F+ and PR Fog+
Commercial kitchen extractor hoods accumulate grease, soot and smoke tar. IPANDA stocks two PROSEPT foaming concentrates for accessible alkali-resistant parts: PR Smoke F+ and PR Fog+. Choose according to the soil, material and application method; maintain duct interiors and electrical components separately under the equipment instructions.
Which parts should be cleaned?
Inspect the external and accessible internal canopy surfaces, removable grease filters and stubborn deposits. Switch off equipment and let it cool before cleaning; protect electrical parts and food from the solution. Treat removable components only when their materials are compatible with alkaline cleaners. Plan fan and internal duct cleaning separately under the equipment maintenance procedure.
PR Smoke F+ or PR Fog+?
PR Smoke F+ is a strong alkaline foaming concentrate for burnt-on grease, soot and smoke tar; the IPANDA product page explicitly lists extractor hoods. PR Fog+ is an enhanced, high-foaming alkaline concentrate for similar stubborn deposits. Applied with a foam generator, it is useful on vertical and hard-to-reach surfaces. Check material resistance before using either product; the enhanced formulation still requires a small test area.
Application and rinsing
Remove loose soil, prepare the working solution according to the selected product’s current label, and apply to an approved surface by hand, spray or foam equipment as instructed. Leave it for the manufacturer-specified time without letting it dry, then rinse the soil away thoroughly with water. Refit filters only after rinsing and drying; before restarting, confirm that solution has not reached electrical parts or food-contact surfaces.
Materials, safety and consumption
Both PR Smoke F+ and PR Fog+ are strongly alkaline: do not mix them with acidic cleaners, and wear gloves, eye protection and protective clothing. Check restrictions for aluminium, other non-ferrous metals, coatings, plastic and rubber; test an inconspicuous area. The PR Smoke F+ (904PR-5) sheet specifies 15–40 mL per litre of final solution for soaking and 20–50 mL/L for foam cleaning thermal and smoking chambers. These are not dedicated hood-cleaning instructions; check the equipment instructions and label for the hood procedure. The sheet gives no fixed contact time. Do not mix PR Smoke F+ with other products. Estimate purchases using accessible surface area, soil level and the actual working-solution consumption of a test clean.
Manufacturer technical sheets
PR Smoke F+ · PDF (RU) ↗PR Smoke F+ · PDF (RU) ↗PR Fog+ · PDF (RU) ↗Products for this task
PR Smoke F+ →
Alkaline concentrate for soaking grease and burnt-on deposits from utensils and equipment parts, and foam cleaning thermal and smoking chambers. pH 14; SKU 904PR-5.
PR Fog+ →
Strong alkaline, high-foaming concentrate for soot, smoke tar and burnt-on grease.
Check chemical and equipment compatibility against the manufacturers’ instructions. Do not mix concentrates; follow label safety precautions.
How we prepare our guidance ↗About IPANDA ↗