Instructions and specifications
Form and preparation
Ready to use; do not dilute.
Application
Apply to a clean, uncoated substrate at −30 to +40 °C; substrate moisture must not exceed 20%, with no ice. Test appearance first. Apply the second coat after 10–20 minutes, until saturated. Below freezing, extend the interval 2–3 times and bring the product to ambient temperature. At +20 °C: drying 30 minutes; protective coating formation 24 hours.
Consumption
ELCON technical sheet (July 2024): 1 L per 6–8 m² for one coat, excluding application losses. Calculated coverage for 9 L: 54–72 m² for one coat, not the complete treatment. Confirm actual consumption by testing, allowing for porosity and coat count.
Important details
Solvent-based and flammable: no flames or smoking; follow the technical sheet’s protective requirements. Not recommended for fine-pored surfaces or areas under constant mechanical wear: colour enhancement may fade quickly while water repellency remains. Shelf life 24 months; store sealed at −30 to +40 °C.
