Hydrophobic wet-look impregnation for paving stones and slabs. 9 L pack. At least two coats are required by the instructions.
Application-based selection. Check material compatibility in the instructions and test on a small area.
Calculator →The first video shows ELCON WESTON being applied with a roller to a granite surface. The treated section takes on a richer colour during application.
The second video shows the treated slab beside a lighter granite surface, making the difference in appearance visible on site.
The videos show the appearance during application and comparison, not the condition of the coating months later. Test the colour on a small area of granite and follow the manufacturer’s instructions before treating the full surface.
«I went over everything with a roller, and it worked out. The colour became three times more defined and richer. Thank you»
Customer in Almaty · personal impression, translated from Russian
The customer shared a video of paving stones after treatment with ELCON WESTON. The recording retains the original audio.
ELCON WESTON hydrophobic impregnation with a wet-stone effect, 9 L canister.
Apply at least two coats to a prepared dry substrate. Check colour and absorption on a test area.
Manufacturer guidance is 1 L per 6–7 m² per coat. Account for both coats; actual coverage depends on the substrate.
Solvent-based product: follow label requirements for ventilation, skin protection and fire safety.